Swivels and Carabiners

    Filter
      4 products

      Ultimate 360° Heavy-Duty Suspension Kit

      The Ultimate Hanging Hook Kit is engineered for dynamic movement. Unlike standard fixed hooks, this system features a built-in 360° rotational bearing and includes a high-capacity M12 Swivel & Carabiner. This combination allows for free-flowing spinning without tangling ropes or unscrewing bolts, making it the gold standard for sensory swings and hammock chairs.

      Technical Specifications

      Mounting Plate (The Base)
      • Material: High-Quality Stainless Steel (Corrosion Resistant).
      • Load Capacity: Up to 250 kg.
      • Dimensions: 5" x 4" x 1.8" (approx. 12.7 x 10 x 4.5 cm).
      • Mechanism: Integrated 360° Rotation.
      Swivel & Connector (The Link)
      • Swivel Size: M12 (10.6 x 5.6 cm).
      • Material: Solid Silver Alloy (Rust/Rain Resistant).
      • Feature: Smooth spin bearing prevents rope twist.
      • Included: 1x Heavy-Duty Carabiner.

      Installation Guide

      This kit includes hardware for both mounting scenarios. Ensure you select the correct bolts for your surface.

      Option A: Concrete / Brick

      Uses the Expansion Bolts

      1. Mark: Hold the plate against the ceiling and mark the two hole locations.
      2. Drill: Drill holes to the depth of the expansion screw.
      3. Insert: Hammer the expansion screws into the holes.
      4. Mount: Align the plate, tighten the nuts until the bolt expands and locks firmly.

      Option B: Wood Beam

      Uses the Hexagon Head Wood Screws

      1. Locate: Find the center of a solid wooden beam or joist.
      2. Pre-Drill: Drill pilot holes (slightly smaller than the screw) to prevent wood splitting.
      3. Fasten: Align the plate and drive the hexagon head screws in using a wrench or socket driver.
      4. Connect: Clip the M12 Swivel and Carabiner to the hook.

      Usage & Setup Comparison

      Feature Sensory Swing (Pod) Hammock Chair Traditional Hammock
      Kits Needed 1 Kit 1 Kit 2 Kits (One per end)
      Swivel Necessity Critical (Prevents dizziness & strap damage) Highly Recommended (For smooth rotation) Optional (Usually fixed)
      Primary Motion Spinning & Bouncing Gentle Swaying / Rotation Back & Forth Arc
      Setup Config Single Central Point Single Central Point Dual Point (3-4m apart)

      Frequently Asked Questions (FAQ)

      Q: Can I install this outdoors?

      Yes. The mounting plate is made of high-quality stainless steel and the swivel is a durable silver alloy. Both are resistant to rust and corrosion, making them suitable for patios and verandas. Note: Store in a dry environment when possible to maximize longevity.

      Q: Why do I need the M12 Swivel if the hook already rotates?

      The hook's built-in rotation handles the major load, but the M12 Swivel adds a second axis of rotation and smooths out the motion. This "double-jointed" setup is critical for sensory swings to ensure the fabric strap never twists or binds.

      Q: What is the maximum weight capacity?

      The ceiling hook is rated for a load capacity of up to 250 kg. However, always ensure your ceiling beam or concrete slab is structurally sound enough to support that weight.

      Usage Tip: This kit is compatible with the full range of Siesta Hammocks chairs and weather-resistant sensory swing pods. The "Quick-Clip" carabiner makes it easy to switch between a swing chair and a sensory pod in seconds!